Smart Battery Charger Maintainer for Cars, Motorcycles, ATVs, and RVs

PRODUCT DESCRIPTION: CHARGING A BATTERY IN THE VEHICLE

IMPORTANT: Do not start the vehicle with the charger connected to the AC outlet, as this could result in damage to the charger.

NOTE: This charger is equipped with an auto-start feature, and current will not be supplied to the battery clamps until a battery is properly connected. The clamps will not spark if touched together.

To charge a battery in the vehicle: 1. Turn off all the vehicle's accessories. 2. Keep the hood open. 3. Clean the battery terminals. 4. Place the charger on a dry, non-flammable surface. 5. Lay the AC/DC cables away from any fan blades, belts, pulleys, and other moving parts. 6. For a negative-ground vehicle, connect the charger's POSITIVE (RED) clamp to the POSITIVE (POS, P, +) battery post, and then connect the charger's NEGATIVE (BLACK) clamp to the vehicle chassis or engine block, away from the battery. 7. For a positive-ground vehicle, connect the charger's NEGATIVE (BLACK) clamp to the NEGATIVE (NEG, N, -) battery post, and then connect the charger's POSITIVE (RED) clamp to the vehicle chassis or engine block, away from the battery. NEVER connect any clamps to the carburetor, fuel lines, or sheet-metal body parts. 8. Connect the charger to an electrical outlet. 9. When charging is complete, disconnect the charger from the AC power, remove the clamps from the vehicle's chassis, and then remove the clamp from the battery terminal.

CHARGING A BATTERY OUTSIDE OF THE VEHICLE: 1. Place the batteries in a well-ventilated area. 2. Clean the battery terminals. 3. Connect the POSITIVE (RED) clamp to the POSITIVE (POS, P, +) battery post. 4. Position yourself and the "negative post extension" cable as far away from the battery as possible, and connect the NEGATIVE (BLACK) clamp to the cable's free end. 5. Connect the charger to the electrical outlet. 6. Select the battery type and the charge rate. 7. When charging is complete, disconnect the charger from the AC power, disconnect the negative clamp, and finally the positive clamp. 8. A marine (boat) battery must be removed and charged on shore.

The charger is microprocessor-controlled and automatically identifies the battery, providing 2A charging current for slow charging and small capacity batteries, with a Float Charger Maintainer. It offers automatic voltage detection for 6V or 12V batteries, and it achieves the highest industry standard of energy efficiency. The charger also provides overcurrent protection, overvoltage protection, overheat protection, reverse protection, and a self-stop function, ensuring safe and extended battery life.

product information: